Smart Solutions for Semiconductors

Network Analyser:

Rent from: 

€ 8,702 per month

Keysight N5245A-400: 

The PNA-X network analyzer is the world´s most integrated and flexible single-connection microwave test engine for measuring active devices such as amplifiers, mixers, and frequency converters. You can choose from five frequency models to meet your specific device test needs: 13.5, 26.5, 43.5, 50, and 67 GHz. The PNA-X provides unrivalled configuration with a built-in second source, combiner, and internal signal-routing switches. 

Applications:

• S-parameters (CW and pulsed)
• Noise figure
• Gain compression
• Intermodulation and harmonic distortion
• Conversion gain/loss
• True-differential stimulus
• Millimeter-wave
• Nonlinear waveform and X-parameter® characterization
• Antenna test

Key Features & Specifications:

• 10 MHz to 50 GHz
• 2- or 4-ports with two built-in sources
• 126 dB system and 129 receiver dynamic range, 32,001 points, 200 channels, 15 MHz IF bandwidth
• High output power (+18 dBm), low harmonics (-60 dBc) and a wide power sweep range (38 dB)
• Best dynamic accuracy: 0.1 dB compression with +15 dBm input power at the receiver
• Low noise floor of -111 dBm at 10 Hz IF bandwidth

Sampling Oscilloscope:

Rent from: 

€ 2,485 per month

Keysight 86100D Infiniium DCA-X: 

86100D DCA-X Wide-bandwidth Oscilloscope The 86100D DCA-X has been engineered for unmatched accuracy, insight, and ease-of-use. In addition to providing industry leading signal integrity measurements, the DCA-X provides:

Powerful new INSIGHT

• Integrated de-embedding / embedding capability (using 86100D-SIM InfiniiSim-DCA license)
• Advanced signal processing such as filtering, FFT, differentiate and integrate functions
• New measurement capability, including Data Dependent Pulse Width Shrinkage (DDPWS), uncorrelated jitter (UJ), J2, J9 and more…

• Dual user interfaces - FlexDCA -- a new customizable vector-based user interface for scope, eye, and jitter measurements - DCA-J “classic” user interface for 100 backwards compatibility
• Customizable user-interface
• Display up to 64 measurements simultaneously
• ONE button setups

• Built-in Waveform Simulator with random/periodic jitter and noise generator
• Live or Offline Signal Analysis (using N1010A FlexDCA Remote Access Software

NEXT GENERATION Platform

• Supports up to 16 channels (with future mini-modules) for testing high-density ASIC/FPGA testing and parallel designs
• Vertical gain and offset controls that can be assigned to all channels and functions
• User-defined multipurpose button
• User-defined analog control knob
• 3X faster CPU than DCA-J
• 100 backwards compatibility with all DCA modules

Mixed Signal Oscilloscope:

Rent from: 

€ 6,809 per month

Tektronix MSO73304DX: 
 

• Up to 33 GHz analog bandwidth and rise time as fast as 9 ps. Enables measurement on the latest high-speed serial standards
• True 33 GHz Real-time Analog Bandwidth on 2 Channels with 33 GHz models
• Industry-leading sample rate and timing resolution
  100 GS/s on 2 Channels (33, 25, 23, 20, 16, and 12.5 GHz models)
• Four-channel Simultaneous Performance
  • Up to 23 GHz Bandwidth
  • Up to 50 GS/s Real-time Sample Rate
  • Up to 500 Megasample Record Length with MultiView Zoom? for quick navigation
  • Fastest Waveform Capture Rate with >300,000 wfms/s maximum per channel
• 16 Logic Channels with 80 ps Timing Resolution for Debug of digital and analog signals (MSO70000 Series only)
• Unique iCapture capability enables viewing analog characteristics of digital channels with single probe connection
• 6.25 Gb/s Real-time Serial Trigger ? Assures triggering on the first instance of a specified NRZ or 8b/10b pattern to allow isolation of pattern-dependent effects
• Application Support for High-speed Serial Industry Standards, wideband RF, Power supplies, and memory ? Enables standard-specific certification, measurement automation, and ease of use

Dual Source Meter:

Rent from: 

€ 280 per month

Keithley 2612B: 

The Model 2612B SourceMeter® SMU instrument, is a two-channel SMU instrument with a tightly integrated four-quadrant design that allows it to simultaneously source and measure both voltage and current. In addition to retaining all the features of the Model 2612A, the Model 2612B has 6&189;-digit resolution, USB 2.0 connectivity, and software command emulation of the Model 2400 SourceMeter SMU Instrument to enable easy migration of legacy test code.

The Model 2612B is equipped with Keithley's high speed TSP® technology (over 190% faster than traditional PC-to-instrument communication techniques,) which dramatically improves the system-level speed to lower the cost of test. The TSP-Link® interface enables multi-channel parallel test and expands the test system without the cost of a mainframe. The wide range of 1.5A DC, 10A pulse, 200V output makes the Model 2612B suitable for testing a wide range of higher voltage and higher current devices materials, components, and sub-assemblies.

Source/Measure Capabilities

• Dual-channel model with 60W power output (30W/channel)
• 4 quadrant source/measure with 6½-digit resolution
• Current Max/Min: 1.5A DC, 10A pulse/ 100fA
• Voltage Max/Min: 200V/ 100nV
• General Features
• Built-in "Plug & Play" Java-Based I-V characterization and test software
• TSP® (Test Script Processing) technology embeds complete test programs inside the instruments
• TSP-Link® expansion technology for multi-channel parallel test
• Software emulation for Keithley's Model 2400 SourceMeter SMU Instrument
• Large, easy-to-read, dual line display

Signal Analyser:

Rent from: 

€ 1,904 per month

Keysight N9020A-526:

Accelerate the development of wireless devices with the speed, performance & applications to adapt to evolving test requirement and shorten test times with rapid local measurements, display updates, marker peak searches & fast sweep.

Simplify testing with fast one-button measurements from X-Series apps: LTE, WLAN, MSR & more along with capturing temporary or transient signals with full-band real-time spectrum analysis.

The MXA signal analyzer is a member of the X-Series, which is an evolutionary approach to signal analysis that spans instrumentation, measurements and software. It gives you the flexibility to satisfy your business and technical requirements across multiple products and programs - now and in the future.

• Frequency ranges: Minimum: 10 Hz / Maximum: 3.6, 8.4, 13.6, 26.5 GHz
• Analysis bandwidth 25 MHz standard; 40, 85, 125 or 160 MHz optional
• Displayed average noise level (DANL): –166 dBm at 1 GHz, with preamplifier on
• Third-order intermodulation (TOI) distortion: +20 dBm at 1 GHz
• W-CDMA ACLR dynamic range 78 dBc with noise correction on
• Phase noise –114 dBc/Hz at 10 kHz offset (1 GHz carrier)
• Amplitude accuracy ± 0.23 dB (up to 3.6 GHz)
• Real-time bandwidth 85, 125, or 160 MHz
• Probability of intercept 100% with signal durations as short as 3.57 μs